Shenzhen YDM Reflector Co., Ltd.

Wired Road Stud


Shenzhen YDM Reflector Co., Ltd.

Addr: 4/F, Bldg.3, Jingsheng Ind. Park, Huawang Rd, Dalang St, Longhua Dist, Shenzhen518109, China
Tel: +86-755-29814411 29814422
Fax: +86-755-28172054
Mail: info@szydm.com.cn
Web: http://www.roadstud.com.cn/
Forum: http://www.roadstud.com.cn

Location:Home >> Product >> Wired Road Stud
  • Intelligent Wired Road Stud
  • Intelligent Wired Road Stud 01.jpg
  • Intelligent Wired Road Stud 02.jpg
  • Intelligent Wired Road Stud 03.jpg
  • Intelligent Wired Road Stud 04.jpg
  • Intelligent Wired Road Stud 05.jpg

Intelligent Wired Road Stud

No:RSAS-2-IN-W

Characteristic:Wired active flush-mounted guidance systems and remind the drivers to pay much attention to pedestrians, Height above the road level less than 6.5 mm, snow plow-proof, over 40 tons compression resistance,
Description:For pedestrians crossing, pedestrians pavement and other heavy traffic use, Only 6.5 mm above the road surface, 40 tons compression resistance, 500 m visible,
  • Description
  • Specifications
  • Model
  • Drawings
  • Installation
  • Application

Key Features:

For pedestrians crossing, pedestrians pavement and other heavy traffic use,

Only 6.5 mm above the road surface,

40 tons compression resistance,

500 m visible,

Spot lighting:

Aluminum alloy+Polycarbonate+Epoxy,

Ø 126 *H 56.5 mm,

0.98 kg,

red/green/yellow

IP 68

Specifications:

 Size

 φ126*56.5 mm

 Net Weight

 0.98 kg

 Material

 Aluminum alloy shell+Polycarbonate+Epoxy 

 Salt-water resistant aluminum

 LED

 φ5 mm, 2 side 6 LED+Top 16 LED or customized

 Light

 steady, or flash (4 HZ or customized)

 Luminous intensity

 5000 mcd

 View distance

 over 500 m

 Color

 yellow, red, green

 Compression resistance

 over 40 tons

 Working temperature

 -20℃~+70℃

 Water ingress rating

 IP 68

 Cable

 1.5 M²  VVR

 Warranty

 One year


Control unit:

 Size

 L260*W205*H90mm

 Material

 Aluminum alloy

 Input Voltage

 220 V AC 50 Hz

 Control Input Interface

 5 V  TTL

 Output Voltage

 24V, 2.5A

 Max Output Power

 50W, One unit can control 30pcs studs

 Power Cable

 1.5 M²  VVR

Item No.:

 RSAS-2-IN-W

 Two-way

1.Preparation. Wear correct personal protection equipment and lay the work zone safety equipment properly.

2.Confirm the installation position. Make sure the road surface is flat.

3.Clean the road surface and make sure the road surface is dry. 

4.Drill a hole with a diameter 127 mm depth 60 mm with the core drill. 

5.Use air pick to remove the bitumen inside the hole. Remove all debris in the hole and make sure the bottom is flat. 

6.Wait till the hole is dry.Spread some epoxy glue all over the hole and insert the road stud. 

7.Make sure the LED's face the direction of traffic. 

8.Press the road stud to make it firmly installed, leaving the four wings mounted on the road surface.

9.Remove the split glue. 

10.Two hours after the installation, go and check all solar road studs to make sure they are installed in right direction and horizontal to the road surface.

11.Take away the work zone safety equipment after two hours.

• Pedestrians crossing, road delineation

• Accident black-spots / cluster sites

• Hazardous road layouts

• Areas adversely affected by poor visibility

• Cycle path

• Car parks

• Before speed hump