Shenzhen YDM Reflector Co., Ltd.

Plastic Solar Road Stud


Shenzhen YDM Reflector Co., Ltd.

Addr: 4/F, Bldg.3, Jingsheng Ind. Park, Huawang Rd, Dalang St, Longhua Dist, Shenzhen518109, China
Tel: +86-755-29814411 29814422
Fax: +86-755-28172054
Mail: info@szydm.com.cn
Web: http://www.roadstud.com.cn/
Forum: http://www.roadstud.com.cn

  • Ultra thin Solar Road Stud
  • Ultra thin Solar Road Stud 01.JPG
  • Ultra thin Solar Road Stud 02.JPG
  • Ultra thin Solar Road Stud 03.JPG
  • Ultra thin Solar Road Stud 04.JPG
  • Ultra thin Solar Road Stud 05.jpg
  • Ultra thin Solar Road Stud 06.jpg
  • Ultra thin Solar Road Stud 07.jpg
  • Ultra thin Solar Road Stud 08.jpg

Ultra thin Solar Road Stud

No:RSPS-F2-U(F/S)

Characteristic:8.5mm thickness, Flexible solar panel, 15 ton compression resistance. 
Description:Ultra thin design, reduce the impact from car or cycle Flexible solar panel 15 tons compression resistance The largest solar charging area. Anti-impact and IP68 design.
  • Description
  • Specifications
  • Model
  • Drawings
  • Installation
  • Application
Key Features:

Ultra thin design, reduce the impact from car or cycle

Flexible solar panel

15 tons compression resistance 

The largest solar charging area.

Anti-impact and IP68 design.

Spot lighting:

Most thinnest solar stud, only 8.5mm thickness

Flexible solar panel, not easily broken

Polycarbonate shell+ epoxy filler

105*135*8.5mm

0.17kg

red/blue/green/yellow/white

IP 68


Specifications:

Size  105x135x8.5mm
Net Weight  150-170g
Material  Polycarbonate+ epoxy filler
LED

 Φ3mm,

 one-way 2 leds,two-way 4 leds,LED horizontal 

 one-way 4 leds,two-way 8 leds,LED vertical

Light  steady, or flash (2HZ or upon request)
Luminous intensity  5000mcd
View distance  over 500m
Color  white, yellow, red, blue, green
Solar Panel  Flexible solar panel 4V 120ma
Battery  LiFePO4 3.2V 600MAH
Battery Life span  More than 3 Years
Full charge time  5 hours @100 Klux(sunny day)
Working time  90 hours after full charge
Activation  photo sensor
Starting intensity  500Lux
Compression resistance  over 15 tons
Working temperature  -20~+70
Water ingress rating  IP68
Warranty  1 years for road side usage

Item No.:

 RSPS-F2-UF  Two-way flashing light 

 2-LED each side horizontal

 RSPS-F2-US  Two-way steady light

 2-LED each side horizontal

 RSPS-F2-VS
 Two-way steady light
 4-LED each side vertical

RSPS  RS  Road Stud  P  Plastic  S  Solar

F1 Flexible solar panel One Side 

F2 Flexible solar panel Two Side 

F  Flash  S  Steady

U  Ultra thin

V  Vertiacl


1.Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the studs can work normally.

2.Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter in an new closed road or a running road, every installers shall be in the isolation area.

If in a running road, the ratio between security personnel and the installing personnel shall be 1:1; If in a closed road, 1:3. 

3.Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation. 

4.Clean the installation location with a brush, meanwhile ensure the location is dry. 

5.Glue the road stud thoroughly with proper amount of epoxy glue. 

6.Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if excessive amount is used.

7.Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in correct direction or not crooked.

8.Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.

Ultra thin design, application in road side, cycle path, pedestrian, etc.